CNC Machining & CAM 6 min read • Updated 11/2026

Generating Multi-Machine Woodworking CNC G-Code (Syntec, DSP, Biesse, Homag, GRBL) & Side B Flip

Go straight from 3D cabinet layouts to .NC, .TAP, .ISO, or .GCODE machine files with System 32 drillings, holding tabs, and Side B flip programs.

Key Takeaways
  • 4 post-processor families: Syntec/Fanuc/Mach3 (.NC), DSP/NcStudio (.TAP), Biesse/Homag/SCM (.ISO), and GRBL (.GCODE)
  • Split Drilling-Only / Cutting-Only files for single-spindle CNC routers without ATC
  • Automatic Side B flip program for double-drilled central partitions

Matching G-Code output to your real workshop controller

A single raw toolpath cannot run cleanly across every woodworking CNC router—headers, tool calls, and cycles vary by controller. A dedicated cabinetry post-processor supports the four main workshop standards out of the box:

  • Syntec / Fanuc / Mach3 (.NC): full ATC tool-change and spindle support.
  • RichAuto DSP / NcStudio (.TAP): widely used on 3-axis nesting routers.
  • Biesse / Homag / SCM (.ISO): industrial ISO syntax for European woodworking centers.
  • GRBL / LinuxCNC (.GCODE): clean open standard for compact or retrofitted CNCs.

Z0 Origin, ±R Cutter Radius Compensation & Ø35 Hinge Pockets

Three settings prevent 90% of first-sheet scrap:

  • Z0 Origin (Top of Board vs. Spoilboard): matching your operator's probing routine prevents cutting into the spoilboard or leaving tabs uncut.
  • Auto ±R Offset Compensation: offsetting contours outward (+R) and internal cutouts inward (-R) directly in the G-Code guarantees dimensional accuracy regardless of controller G41/G42 quirks.
  • Ø35 mm Hinge Cups without ATC: when no dedicated T3 boring bit is mounted, helical G2 pocket interpolation with the T1 Ø6 mm cutter mills clean hinge cups automatically.

Automatic Holding Tabs and Split Files for Non-ATC Routers

On vacuum tables, narrow strips (fillers, stretchers, rails < 220 mm) lack hold-down area and can shift during the final cut pass. Automatic holding tabs keep narrow parts anchored until the spindle stops.

For single-spindle machines without an automatic tool changer, downloading 1. Drilling Only (Ø5 mm bit) and 2. Cutting Only (Ø6 mm endmill) makes manual tool swaps fast and mistake-proof.

Handling Double-Sided Partitions (Side A + Side B Flip Program)

Wardrobes and multi-bay units require central partitions drilled on both sides for shelf pins, drawer slides, and fasteners. An intelligent post-processor cuts Side A on the main sheet and automatically compiles a separate Side B Flip Program: the operator flips the part in X against the (X=0, Y=0) fence with an automatic M0 pause between parts.

Frequently Asked Questions

Can I run the generated G-Code on a CNC without an automatic tool changer (ATC)?

Yes. You can download Drilling-Only and Cutting-Only files separately per sheet, and mill Ø35 hinge pockets via G2 interpolation with your main cutter.

How are narrow rails prevented from moving on a vacuum bed?

Holding tabs are automatically generated on the final Z pass for narrow parts under 220 mm.

How does double-sided drilling work on central partitions?

A dedicated Side B flip G-Code file is compiled automatically with X-mirroring and M0 operator pauses between parts.

Which cabinet joinery systems are supported?

Confirmat screws, Minifix cam locks, wood dowels, biscuits, System 32 shelf rows, drawer slide drillings, back grooves, and Gola notches.

FULL PRO FREE TRIAL — NO COMMITMENT

Test the full 3D → Nesting → G-Code workflow on your own projects

Start free with 3 trial projects unlocking every Full Suite PRO feature (7-day lifespan per project), directly from your browser or SketchUp.